|
The function of Cat5 Video Baluns is to replace the traditional 75-ohm RG59 coaxial cable with Cat 5 unshielded twisted pair ( UTP ) cable in CCTV and surveillance Installations and provides a solution for high quality and long distance transmission. Single channel active ( powered) KIT with one BNC output and screw terminal for video input. Converts video signal which has been transmitted over CAT5 cable back to coaxial so it can be connected to CCTV multiplexers, DVR's or video monitors. It has ground lifting circuit ( ground loop isolation) which makes it ideal for use on 3 phase premises. Maximum working distance up to 1,500 metres for colour. Unit is matched with a single channel passive (no power required) transmitter balun (included)
Product Feature: Transmit Video Signals up to 1500m via Cat5 UTP Lan Cable Input - 1 x BNC 75 Ohm 1v P~P Active design (power required for Receiver) - Transmitter Balun Included (Passive - No Power Required)
Output - 2 x Terminal Connections
Using Standard Cat5 cable, patching. Dimensions 103 x 70 x 30mm
Maximum 1500m working distance (Passive) - Dua lVoltage 12vDC/ 24vAC
Cost
Cat5 UTP cable is significantly less expensive than coaxial cable. The cost per foot of UTP can be up to 70% less than that of coaxial cable.
Working Distance
Over a maximum of 150m, Cat5 UTP cable gives exceptional quality, far better than coaxial cable. Also, Cat5 UTP cable has outstanding interference rejection. Usage
Baluns should be used in pairs with any video equipment, especially suitable for Cameras to DVR, DVR to CCTV Monitor, Cameras to Video switch and Cameras to multiplexer. Package Includes Our Guide To Using Cat5 Cable & Equipment is available by Clicking Here  |
